Wisycom Four Channel ENG Kit w/ MCR54 4-Ch Slot Receiver + Rear Plate & (4) MTP40S-UN Beltpack Transmitters

Product Description
Product Reviews

This Kit Includes:

(1) MCR54 Four Channel Slot Receiver

(4) MTP40S-UN Bodypack Transmitter

(1) Adapter Plate for MCR54 (Select BPA54 for external use, SLK54-SX for use with Sony camera, SLK54-IK for use with SUPERSLOT)

MCR54 is a camera quadruple true diversity wireless microphone receiver system in a modular stand alone or slot in configuration. It’s compatible with most camera’s slots and “multi-slot” mixer accessories.

Four channels True Diversity receiver (8 Receiver boards!)
Exceptional compactness and high robustness
DSP Analogue & Digital Audio Output (AES3)
Up to 790 MHz bandwidth in 470/1260 MHz range
Next Gen Multiband front-end filtering:
- High Q electronically tunable filter in 470-798 MHz
- 1st narrowband filter
- 2nd narrowband filter
Wideband and Narrowband DSP-FM operation (SW selectable):
- Narrowband allows more 50% band efficiency
- Narrowband allows about 3dB extra sensitivity and noise immunity
Extreme low noise VCO with ultrafast spectrum scan for optimal quick & easy setup
High contrast OLED display
Automatic scan & transmitter programming through infrared and Bluetooth 5 long range
DSP based for extreme flexibility and multi-companding operations
Monitor & control through USB C or Bluetooth 5 (long range) on Wisycom Manager 2.0 (computer SW)
Rear antenna connectors and micro audio and power adapter

MTP40S-UN is an extremely small and light pocket transmitter especially designed for professional wireless microphone applications. Very easy and quick to use thanks to OLED display, dedicated buttons and a joggle selector. MTP40S benefit also of the latest Wisycom RF technology along with an enhanced robustness against noise and inter-modulation.

Ultra wide bandwidth in 470/654 MHz range
Input dynamic extension with an integrated HW limiter (30 dB above peak)
Enhanced robustness against self-interferences and antenna performances thru a proprietary “intermodulation cancellation” circuit
Miniature design with flexible pcb (no connectors) for extended reliability
Ultra-light metal alloy body (80g without batteries)
User selectable multi-companding systems:
ENR (noise optimized)
ENC (voice optimized)
Battery: 2 AA Alkaline, rechargeable NiMH or Lithium
Autonomy:
> 7h @ 100mW output power
> 10h @ 50mW output power
> 14h @ 10mW output power
Infrared interface for management and firmware update
Easy and quick to setup thru an Oled display gain/freq button and a joggle selector
Extended regulation on Mic input gain: 85dB in 1dB step
Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments
48V phantom power to use wired mic thru the PHA48 accessory

3-Pin LEMO connector configurable on ‘mic’ display menu in 5 options:
▪ ’2 wires’: gain selectable -60 ÷ +40 (-54 dBu ÷ +26 dBu peak), no bias voltage
▪ ‘2 wires + bias’: gain selectable -60 ÷ +40 (-54 dBu ÷ + 6 dBu peak), 5.5 V on 4k7 bias supply
▪ ‘3 wires': gain selectable -60 ÷ +40 (-54 dBu ÷ +26 dBu peak)
▪ ‘2 wires & phantom’: gain selectable -60 ÷ +40 (-54 dBu ÷ +26 dBu peak)
▪ ‘2 wires + bias & phantom’: gain selectable -60 ÷ +40,(-54 dBu ÷ + 6 dBu peak), 5.5 V on 4k7 bias supply

BPA54 is a stand alone plate for use with the MCR54 four channel receiver. It features a 4-pin hirose connector for external power input, and two TA5M connectors (XLR 5 Pin Mini) for four channels of analogue or digital AES audio output.

Write a Review