This used IFB system is in good condition. It has been tested and verified working to spec by our service department. Transmitter includes AC power supply; receivers include spring loaded belt clips.
Block 23 563.2-588.7 MHz
The Lectrosonics IFB T1 Transmitter is a rugged, machined aluminum package with an input section is adjustable for virtually any microphone or line level audio source. Level indicating LEDs are provided on the control panel to make level settings quick and accurate, without having to view the receiver. The antenna is a detachable, locking 1/4 wavelength flexible bronze cable that connects to a 50 Ohm BNC connector on the transmitter. The T1 will operate with any Lectrosonics R1 or R1a IFB Receiver in the same frequency group.
The IFB R1a receiver provides simplicity and flexibility in a package that is intuitive for untrained users to operate. The receiver is housed in a rugged machined aluminum package. An optional spring-loaded belt clip (shown at right) provides a secure mounting on a wide variety of belts, pockets and fabrics. The belt clip is removable to reduce its size and allow mounting into other types of bags and belt worn mounting systems common in field production.
Preset frequency can be set without power or transmitter signal
Scan mode stores up to five additional frequencies
Multi-color LED and rotary control for programming and operation
High sensitivity for extended operating range indoors or outdoors