No Sales Tax On Orders Shipped Outside of Florida
- Sennheiser MKH416 Shotgun Mic
- K-Tek KEG-100CCR Avalon Graphite Coil Cabled Boompole, Side XLR Connector (2'5" to 8'9")
- Rycote 18cm Standard Hole Super Softie
- Rycote Universal Shock Mount
- TAI Audio XLRM - XLRF (RA) Coiled Cable, (Length: 3'-14')
- Sennheiser MZW-415 Foam Windscreen
- Sennheiser MZQ100 Mic Clip
- Sennheiser Microphone Case
The venerable MKH 416 is a compact pressure-gradient microphone with short interference tube, highly immune to humidity due to its RF condenser design. Featuring high directivity, low self noise, high consonant articulation and feedback rejection, the MKH 416 can handle difficult exterior filming and reporting conditions without any difficulty. Supercardioid/lobe pattern, matte black finish, supplied with the MZW415 windscreen.
The KEG100CCR Avalon Graphite Boom Pole has a collapsed length of 2″5″ | 74cm and an extended length of 8’9″ | 267cm and only weighs 1.362lbs | 601g. This 5-section Graphite Economy Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ – 16 male thread and the bottom attachment is a Male 3-pin XLR Side Exit with Delrin Base.
Using the Avalon knurled collars on K-Tek’s well-known locking mechanisms trusted by industry professionals worldwide, this boom pole is easy to transport and quick to deploy.
K-Tek Avalon Graphite: Lightweight & Durable
The K-Tek Avalon graphite poles are crafted of the same high-density graphite used in the Klassic line with the same goal of balancing maximum strength and minimum weight.
Super-Softie | Premium slip-on microphone Windshield with Rycote’s new revolutionary 3D-Tex™ fabric covering for unparalleled sonic performance, wind-noise suppression and field durability.
3D-Tex™ contributes to amazing noise reduction by both its layered internal structure and its surface
texture. It retains its acoustic properties even under adverse conditions. If 3D-Tex™ becomes rain soaked it can be squeezed out and shaken dry very quickly - if it becomes coated with dust it can be rinsed quickly without affecting its performance. The Super-Softie combines excellent acoustic transparency with superb attenuation of wind noise. It has no rigid internal structure, causes virtually no polar pattern distortion and is extremely robust in challenging environments such as ENG. Its shape and structure allow it to reduce wind noise at extreme LF and infrasonic frequencies - where the greatest wind energy lies - more efficiently than previous designs. The initial noise reduction can be in excess of 30 dB and acoustic artifacts are extremely low.
The Rycote Universal Shotgun Mount is an ideal solution for use on either a camera shoe or a boom pole. The mounts Duo-Lyre cradle will hold your microphone and supply the best isolation against handling noise and low frequency rumble and vibrations from camera motors or when used on a boom pole. Virtually unbreakable mic clip accepts 19-34mm & MKH mics, 3/8” Female thread, includes Brass 3/8” shoe adapter.
SENNHEISER MKH 416
Transducer Pressure Gradient/Interference Receiver Condenser Polar Pattern Supercardioid/Lobar Frequency Response 40 Hz - 20 KHz Dynamic Range (Typical) 117 dB Signal-to-Noise Ratio 81 dB Maximum Input Sound Level 130 dB, (@ 1 KHz)
Sensitivity 25 mV/Pa +/- 1dB
Power Requirements Phantom Power 48v, (± 12v) Output Impedance Nominal Impedance: 25 Ohms
Minimum Terminating Impedance: 800 Ohms
Output Connectors XLR-3M Type Pad None Low Frequency Roll-Off None Applications Film, Radio and Television, Especially for Outside Broadcast Applications. Dimensions 9.84 x 0.74 (250 x 19mm) LxDiameter Weight 5.82 oz. (175 g)
Material Graphite Sections 5 Minimum Length 2.02 to 8.9' (66 to 267cm) Maximum Length 2.02 to 8.9' (66 to 267cm) Weight 1.262 lbs (572g) Load Capacity Not Specified By Manufacturer