(1) Sennheiser MKH60-P48 Shotgun Mic
(1) Rycote Classic Softie, Large Hole (24/25), 18 cm length
(1) Rycote Universal Shock Mount
(1) Sennheiser MZQ40 Mic Clamp
(1) Sennheiser Microphone Case
The MKH60-P48 is an RF Super-Cardioid/Lobe (shortgun) Condenser 48V Phantom Powered Microphone, with switchable -10 dB pad, switchable low cut filter (-5 dB @ 100 Hz) and high frequency boost (+5 dB @ 10 Hz).
The MKH 60 is a lightweight short gun microphone. It is versatile and easy to handle and its superb lateral sound muting makes it an excellent choice for film and reporting applications. Its high degree of directivity ensures high sound quality for distance applications. MKH Series microphones require external power for operation, supplied by input equipment (mixer, recorder, etc.) or by one of several accessory power supplies offered. Microphones are weather-resistant, and therefore ideal for location recording in any environment. All MKH models are low-impedance, balanced output, terminating in a standard 3-pin XLR connector (5-pin XLR on MKH418S).
- Extremely low inherent self-noise
- High sensitivity
- High directivity throughout the whole frequency range
- Transformerless and fully floating balanced output
- Infra-sonic cut-off filter
- Symmetrical transducer technology ensures extremely low distortion
- Switchable pre-attenuation, switchable roll-off filter and switchable treble emphasis
- Rugged and weather-proof
- Black, anodized light metal body
The Rycote Softie is a slip-on open-cell foam windshield with integral fur cover. The Softie will reduce wind-noise up to 40 dB and is the standard world wide in the broadcast industry. Softie windshields are available in a large range of sizes to fit most popular shotgun microphones.
Both the acoustic foam and synthetic fur are made from materials which are specially designed and manufactured for the purpose, and as a result offers very good wind-noise reduction without any adverse effect on High-Frequency. In addition the foam is not susceptible to UV or moisture damage, giving this product great longevity.
Advanced materials, adhesives and assembly techniques all combine to make the Softie an extremely tough product that provides excellent wind protection in the harshest of environments.
The Rycote Universal Shotgun Mount is an ideal solution for use on either a camera shoe or a boom pole. The mounts Duo-Lyre cradle will hold your microphone and supply the best isolation against handling noise and low frequency rumble and vibrations from camera motors or when used on a boom pole. Virtually unbreakable mic clip accepts 19-34mm & MKH mics, 3/8” Female thread, includes Brass 3/8” shoe adapter.
|Frequency Response||50 Hz - 20 kHz, (-3 dB)|
|Dynamic Range (Typical)||119 dB|
|Signal-to-Noise Ratio||88 dB|
|Maximum Input Sound Level||125 dB, (142 dB with -10 dB Attenuation)|
|Power Requirements||Phantom 48v, (+/- 4v)|
|Output Impedance||150 Ohms|
|Output Connectors||XLR-3M Type|
|Pad||-10 dB Attenuation Switch|
|Low Frequency Roll-Off||Yes, 5 dB/Octave @ 100 kHz
Treble Emphasis Switch: 5 dB/Octave @ 10 kHz
|Applications||Film, Video and Broadcast Production.|
|Dimensions||11 x 1" (280 x 25mm) LxDiameter|
|Weight||5.3 oz. (160 g)|