- Sennheiser MKH 60-P48 Shotgun Mic
- K-Tek KEG-100CCR Avalon Graphite Coil Cabled Boompole, Side XLR Connector (2'5" to 8'9")
- Rycote Modular Windshield WS 4 Kit w/ Connbox CB1
- Rycote Windjammer WJ4
- TAI Audio XLRM - XLRF (RA) Coiled Cable, (Length: 3'-14')
- Sennheiser MZQ40 Mic Clamp
- Sennheiser Microphone Case
The MKH60-P48 is an RF Super-Cardioid/Lobe (shortgun) Condenser 48V Phantom Powered Microphone, with switchable -10 dB pad, switchable low cut filter (-5 dB @ 100 Hz) and high frequency boost (+5 dB @ 10 Hz).
The MKH 60 is a lightweight short gun microphone. It is versatile and easy to handle and its superb lateral sound muting makes it an excellent choice for film and reporting applications. Its high degree of directivity ensures high sound quality for distance applications. MKH Series microphones require external power for operation, supplied by input equipment (mixer, recorder, etc.) or by one of several accessory power supplies offered. Microphones are weather-resistant, and therefore ideal for location recording in any environment. All MKH models are low-impedance, balanced output, terminating in a standard 3-pin XLR connector (5-pin XLR on MKH418S).
The KEG100CCR Avalon Graphite Boom Pole has a collapsed length of 2″5″ | 74cm and an extended length of 8’9″ | 267cm and only weighs 1.362lbs | 601g. This 5-section Graphite Economy Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ – 16 male thread and the bottom attachment is a Male 3-pin XLR Side Exit with Delrin Base.
Using the Avalon knurled collars on K-Tek’s well-known locking mechanisms trusted by industry professionals worldwide, this boom pole is easy to transport and quick to deploy.
K-Tek Avalon Graphite: Lightweight & Durable
The K-Tek Avalon graphite poles are crafted of the same high-density graphite used in the Klassic line with the same goal of balancing maximum strength and minimum weight.
The Rycote Modular Windshield Kit is the professionals' choice when maximum isolation from wind and handling noise is required.
This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.
A Modular Windshield Kit is comprised of the following three main components: Modular Suspension, Modular Windshield and Windjammer.
Our suspensions provides complete isolation against handling noise and cable-borne noises, by supporting the microphone in a cradle arrangement using Lyre suspension webs.
The Windshield basket completely surrounds the microphone and its connector, sliding onto the Modular Suspension to provide up to 30dB of wind noise attenuation. This is the first layer of windshielding protection for your microphone.
The Windjammer introduced by Rycote in 1985, is high quality synthetic fur covers, designed to fit perfectly over the Modular Windshield. It gives an additional 20dB of wind noise attenuation. Fitted with a drawstring & toggle to allow snug and easy fitting.
Suitable for shotgun microphones from 211mm up to 280mm in length and 19-34mm diameter with a 3-pin XLR connector such as the Sennheiser MKH 416, MKH 60 and Schoeps CMIT 5.
- Flexible, complete windshield and suspension package, which provides varying levels of windshielding for numerous microphone configurations
- The iconic Windshield Kit is the industry standard, and leads the way in windshielding and suspension technology
- Ideal for popular mics such as Sennheiser MKH 416, MKH 60, Sanken CS 3 & Schoeps CMIT 5U.