No Sales Tax On Orders Shipped Outside of Florida
- Sennheiser MKE600 Short Shotgun Microphone
- K-Tek KEG-100CCR Avalon Graphite Coil Cabled Boompole, Side XLR Connector (2'5" to 8'9")
- Rycote Super-Blimp NTG w/ Super-Shield Windjammer (Medium) & XLR-3M to Angled XLR-3F 260mm cable
- Rycote 3/8″ Boompole Adapter & Pistol Grip Handle
- Sennheiser MZS 600 Camera Shock Mount
- Foam Windscreen
- TAI Audio XLRM - XLRF (RA) Coiled Cable, (Length: 3'-14')
The MKE 600 from Sennheiser is a shotgun microphone designed for use with a camcorder or video DSLR. Building on the company's extensive expertise in designing shotgun microphones, it is able to take on even the toughest video sound challenges, while still being compact and short relative to previous models. With its high level of directivity, the microphone focuses on the sounds in front of the camera, while attenuating unwanted sound coming from the sides and rear.
An included foam windshield reduces the effect of wind noise, while a switchable low-cut filter adds additional wind and handling noise attenuation. The MKE 600 can be phantom powered or operated on an AA battery for about 150 hours. An integrated camera shoe and shock mount provides convenient on camera mounting. The rugged and all metal housing means the microphone will function perfectly in outdoor recording situations.
The KEG100CCR Avalon Graphite Boom Pole has a collapsed length of 2″5″ | 74cm and an extended length of 8’9″ | 267cm and only weighs 1.362lbs | 601g. This 5-section Graphite Economy Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ – 16 male thread and the bottom attachment is a Male 3-pin XLR Side Exit with Delrin Base.
Using the Avalon knurled collars on K-Tek’s well-known locking mechanisms trusted by industry professionals worldwide, this boom pole is easy to transport and quick to deploy.
K-Tek Avalon Graphite: Lightweight & Durable
The K-Tek Avalon graphite poles are crafted of the same high-density graphite used in the Klassic line with the same goal of balancing maximum strength and minimum weight.
The Super-Blimp NTG from Rycote is a complete windshield and shock-mounting system for the Rode NTG series and similar shotgun microphones. The kit provides patented Lyre Technology and a broadcast industry basket to protect against from shocks, vibrations, and wind noise—all with acoustic transparency. The included Windjammer, designed to slip over the basket, protects against extreme wind noise.
A Rycote 90° Shortie XLR connector is situated inside the basket, complete with an integral RF shield to protect against the kind of dirty audio attributed to radio interference. Furthermore, a boom adapter and pistol grip handle are included with the unit. Releasing the microphone from the basket is easy thanks to its quick-release pods.
Compatible with the following shotgun microphones:
Rode: NTG1, NTG2, NTG3, NTG4, NTG4+
Schoeps CMIT 5U
Sennheiser: MKE600, MKH416
|Professional Compatibility||Video Filming|
|Effective Output Level||-36 dBm|
|Frequency Response||20 - 20000 Hz|
|Length||2' 7"-9' 2" (0.82-2.80m)|
|Load Capacity||Not Specified By Manufacturer|