No Sales Tax On Orders Shipped Outside of Florida
- Sennheiser MKE600 Short Shotgun Microphone
- K-Tek KE-110CC Avalon Aluminum Coil Cabled Boompole (Length: 2'7" - 9'2")
- Rode Blimp Windshield w/ Rycote Shock Mount Suspension System
- Rode Dead Wombat Windjammer w/ Caring Brush
- Sennheiser MZS 600 Camera Shock Mount
- Foam Windscreen
- TAI Audio XLRM - XLRF (RA) Coiled Cable, (Length: 3'-14')
The MKE 600 from Sennheiser is a shotgun microphone designed for use with a camcorder or video DSLR. Building on the company's extensive expertise in designing shotgun microphones, it is able to take on even the toughest video sound challenges, while still being compact and short relative to previous models. With its high level of directivity, the microphone focuses on the sounds in front of the camera, while attenuating unwanted sound coming from the sides and rear.
An included foam windshield reduces the effect of wind noise, while a switchable low-cut filter adds additional wind and handling noise attenuation. The MKE 600 can be phantom powered or operated on an AA battery for about 150 hours. An integrated camera shoe and shock mount provides convenient on camera mounting. The rugged and all metal housing means the microphone will function perfectly in outdoor recording situations.
The KE110CC Avalon Aluminum Boom Pole has a collapsed length of 2’7″ | 79cm and an extended length of 9’2″ | 279cm and only weighs 1.723lbs | 781g. This 5-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ – 16 male thread and the bottom attachment is a Male 3-pin XLR – Straight Exit.
Using the Avalon knurled collars on K-Tek’s well-known locking mechanisms trusted by industry professionals worldwide, this boom pole is easy to transport and quick to deploy.
K-Tek Avalon Aluminum: the economical alternative to Graphite
The K-Tek Avalon Aluminum poles are crafted of black anodized aluminum with a smooth finish, the Avalon aluminum poles extend and collapse with ease.
The Blimp Windshield and Rycote Shock Mount Suspension System from Rode is designed to provide your shotgun microphone with protection from wind noise and isolation from shock and vibration. The Blimp attaches to any standard boompole with the 3/8" thread attachment at the base. Housed inside the grip is a Mogami microphone cable which splits via a junction box to a flexible thin cable inside the Blimp, to minimize the transference of vibration to the microphone. Dead Wombat windshield, caring brush and tail/patch cable are included.
|Professional Compatibility||Video Filming|
|Effective Output Level||-36 dBm|
|Frequency Response||20 - 20000 Hz|
|Length||2' 7"-9' 2" (0.82-2.80m)|
|Load Capacity||Not Specified By Manufacturer|