No Sales Tax On Orders Shipped Outside of Florida.
C1 Frequency (614.400 - 691.175 MHz Blocks 24, 25 and 26)
- SRC Dual Slot Receiver
The Lectrosonics SRc units each consist of two receivers which are built into a single, ultra-compact housing, with optional adaptors for video camera receiver slots and for standalone use. The two internal receivers can be operated separately, each using switching, antenna combining diversity, or in tandem with ratio diversity reception. The audio inputs of the receivers can be mixed internally or left separated for discrete recording tracks or external mixing.
These new Digital Hybrid Wireless dual-channel diversity slot receivers include a wide tuning range of three standard Lectrosonics blocks or 76 MHz. Tuning steps of 100 kHz or 25 kHz allow for up to 3072 frequencies per band. Tracking front-end filters provide excellent out-of-band rejection of RF noise, making the receivers ideal performers in extreme RF conditions. And DSP compatibility modes allow the receivers to be used with a variety of Lectrosonics systems, including the IFB transmitters, as well as a variety of other wireless systems. An IR (infrared) port is included to simplify setup with IR enabled transmitters.
The SmartTune feature quickly and automatically selects frequencies based on local scan data. Audio frequency response: 40 Hz - 20 kHz +- 1dB. Four frequency ranges are available for worldwide use.
- LT Transmitter (Qty. 2)
The LT transmitter features 25 or 100 kHz tuning steps (yielding up to 3,072 selectable frequencies), an integrated multi-function switch with menu-selectable modes for power, mute or talkback, and a graphic LCD and membrane switch panel plus IR synch port for ease of setup and operation. The LT additionally facilitates user-selectable RF transmission power of 50 or 100 mW. A detachable antenna adds to the LT's versatility by allowing for remote mount antennas. Also, the LT responds to remote commands from either the dedicated Lectrosonics RM remote unit or smartphone apps with this capability. Along with the standard Lectrosonics microphone input, a user-selectable 1 MOhm input is ideal for use with musical instruments, including guitars with passive pickups. The LT is housed in a newly designed machined aluminum housing featuring a super-hard EbNi ‘Ebony’ conductive finish. Power is provided via two AA batteries. Applications for the LT transmitter include TV and film production, ENG, stage, musical instruments, camera hops, corporate AV, and many others.
- SREXT Adapter
- TA3F - XLRM Audio Output Cables (Qty. 2)
- TAI SR Locking BDS Cable
This particular wireless microphone device operates in portions of the 617-652 MHz or 663-698 MHz frequencies. Beginning in 2017, these frequencies are being transitioned by the Federal Communications Commission (FCC) to the 600 MHz service to meet increasing demand for wireless broadband services. Users of this device must cease operating on these frequencies no later than July 13, 2020. In addition, users of this device may be required to cease operations earlier than that date if their operations could cause harmful interference to a 600 MHz service licensee's wireless operations on these frequencies. For more information, visit the FCC's wireless microphone website at www.fcc.gov/wireless-microphones-guide or call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC).