*Please note, due to IATA regulations, we are unable to expedite shipment of lithium batteries. All lithium battery orders must ship via ground service.*
This system Consists of 4 DUO-150 batteries and a VL-4s charger
The 146Wh DUO 150 V-Mount Li-Ion Battery from IDX is equipped with 2 x D-Tap and 1 x USB power out connector for powering peripheral equipment. This Li-Ion battery is designed for the Digital Cinematography market where high current loads of 10A/120W are standard.
The DUO-150’s high capacity of 146Wh gives extended running times, while being under the 160Wh IATA limit for carry-on aircraft baggage.
High current draw up to an impressive 10A / 120W.
2 x D-Tap DC output (unregulated) connectors, each capable of taking a 50W load.
USB Type-A power output, regulated at 5V (1A/5W maximum draw). Auto shut Off function when not active for 30 minutes
5 Power Status LED's are located on the side of the DUO-150 Battery for a quick and accurate check of remaining capacity
Battery circuit protection ensures that the DUO-150 Battery is fully protected against common causes of battery misuse, guarding against over charge, over discharge, over current, and exposure to high temperatures.
12V auto cut-off prevents over-discharging (while load is applied).
Lightweight, compact, and high-performance Li-ion battery with a durable design.
Attaching DUO-150 batteries to cameras without a standard V-Mount connection is possible through the use of P-V2 and P-VS2 adaptor plates (sold separately).
The DUO-150 Battery is fully compatible with all ENDURA V-Mount chargers and accessories.
The VL-4S is a four-channel, simultaneous Li-Ion (Lithium-Ion) fast charger. Up to four Li-Ion Endura V-mount batteries can be charged in 2.5 hours or less.
The VL-4S offers a lightweight design (6.83 lbs) with a convenient built-in handle.
The highly reliable V-Mount battery mount is becoming more and more prevalent on many broadcast and professional camcorders. In response, IDX has adapted the design of their batteries and chargers to with the V-Mount design.
An LED condition indicator offers a quick glance of each battery's charge status.
As Li-Ion is memory free, batteries can be charged from any state regardless of the batteries' charge status. Each IDX Li-Ion battery has its own built-in microprocessor which enables direct communication with the charger's program to individually select for each battery the correct charge program specific for that battery.
Worldwide AC Power
As with all IDX chargers, the VL-4S's power switch is recessed to prevent an accidental loss of power. A worldwide, auto-sensing AC power (AC 100-240V) operation is standard.