*Please note, due to IATA regulations, we are unable to expedite shipment of lithium batteries. All lithium battery orders must ship via ground service.*
This system Consists of 2 DUO-150 batteries and a VL-2 Plus charger
The 146Wh DUO 150 V-Mount Li-Ion Battery from IDX is equipped with 2 x D-Tap and 1 x USB power out connector for powering peripheral equipment. This Li-Ion battery is designed for the Digital Cinematography market where high current loads of 10A/120W are standard.
The DUO-150’s high capacity of 146Wh gives extended running times, while being under the 160Wh IATA limit for carry-on aircraft baggage.
High current draw up to an impressive 10A / 120W.
2 x D-Tap DC output (unregulated) connectors, each capable of taking a 50W load.
USB Type-A power output, regulated at 5V (1A/5W maximum draw). Auto shut Off function when not active for 30 minutes
5 Power Status LED's are located on the side of the DUO-150 Battery for a quick and accurate check of remaining capacity
Battery circuit protection ensures that the DUO-150 Battery is fully protected against common causes of battery misuse, guarding against over charge, over discharge, over current, and exposure to high temperatures.
12V auto cut-off prevents over-discharging (while load is applied).
Lightweight, compact, and high-performance Li-ion battery with a durable design.
Attaching DUO-150 batteries to cameras without a standard V-Mount connection is possible through the use of P-V2 and P-VS2 adaptor plates (sold separately).
The DUO-150 Battery is fully compatible with all ENDURA V-Mount chargers and accessories.
The IDX VL-2SPlus is a two-channel, simultaneous Li-Ion (Lithium-Ion) fast charger with a built-in 100W power supply. Up to two Li-Ion Endura V-mount batteries can be charged in 5 hours.
The VL-2SPlus offers a lightweight design (3.3lbs) with a convenient built-in handle.
This updated charger allows the user to simultaneously charge two batteries.
The highly reliable V-Mount, battery mount is becoming more and more prevalent on many new broadcast and professional camcorders. In response, IDX has adapted the design of their batteries and chargers to with the V-Mount design.
An LED condition indicator is offers a quick glance of each batteries charge status.
The optional A-E2NP allows the VL-2SPlus to charge NP style batteries of any one of the following chemistries:
Li-Ion (Lithium Ion)
NiCd (Nickel Cadmium)
NiMH (Nickel Metal Hydride)
A standard 4-Pin Canon type connector is available on the front panel for 100 watts of DC power.
Orange (battery fault)
World-Wide AC Power
As with all IDX chargers, the VL-2's power switch is recessed to prevent an accidental loss of power. A world-wide, auto-sensing AC power (AC 100-240V) operation is standard.