ProGrid 2x8 lne op If TP: 1RU, 2 x 8 channel Line Outputs, Dual PSU, SANE Twisted Pair CAT5 Only, includes 17 x 3-pole Euroblock screw connectors
The PG-Audio devices are 1RU digital audio I/O interface devices for the ProGrid Signal Transport Solution featuring the Optocore™ Optical and SANE™ CAT5 Digital Network technologies.
All PG-Audio devices transports analog audio and data signals in a variety of ways that can be customized to fit user needs. The PG16-Audio devices have four different card types including microphone inputs, Line Level inputs and outputs, and dual microphone preamplifiers. The cards are available in seven different configurations that enable the conversion of signals: 16 inputs, 16 outputs, 8 inputs, 8 outputs and 8 dual microphone inputs with two independent adjustable gains. A single PG16-Audio-FX device can exchange up to 1024 audio channels from the Optocore Fiber Network and 64 audio channels from the SANE network. A single PG16-Audio-TP device can exchange up to 64 audio channels from the SANE Network and two AES/EBU ports, each capable of 16 channels. Devices include dual power supplies with automatic switchover.
Product Model Options
OPTOCORE Network Redundant fiber connections can be established using the two provided Optocore Optical LINK interfaces. All PG-Audio devices are equipped with either single-mode or multi-mode SFP fiber transceivers. Depending on the selected transceivers, distances from 2300ft (700m) up to 43.5mi (70km) can be covered. The dual redundant ring structure provides maximum safety in a network with low latency. Four RS485 ports allow the transport of a wide range of serial data standards, such as RS422, DMX and MIDI. In addition to the audio signals, video and data signals are transmitted by the fiber connection.
SANE Each PG-Audio panel is equipped with two SANE ports, which enables send and receive of up to 56/64 audio channels via standard CAT5 cable. Use the SANE ports to expand the number of inputs and outputs on ProGrid FX devices. SANE ports can also be used to send Ethernet data. In addition, PG-Audio devices have two separate LAN ports for 100BaseT Ethernet transmission.
Word Clock Optocore technology uses synchronous transmission, allowing extremely low-jitter Word Clock transportation together with audio and video. All ProGrid devices are equipped with a Word Clock IN and OUT to enable the synchronization of the devices to an external source and are used to pass on the Word Clock from one device to the next. For stand-alone applications, the devices are equipped with an internal Word Clock.
Features and Benefits • 4 x RS485 serial data connections • Word Clock input and output • 2 x optical LINK interface with duplex LC connectors (FX version only) • 2 x AES/EBU ports, 16 channels each (TP version only) • USB, RS232 and LAN ports for configuration and control • Dual power supply for redundancy
PG16-Audio Panels • 16-channel converter • 4 Card Types: