- Switching bandwidth in 25k steps
- 470 - 548 or 518 - 608 MHz operating range
- Digital Modulation, 2 ms end-to-end delay
- OLED display and Audio Easy Access Menu, shows TX battery status
- Encryption, User settable, Audio Ltd Proprietary
- Modular Adaptor Design: Swap between 25-pin Superslot™/Panasonic™ or Stand-alone cable
A fully digital and modular wireless receiver made from durable precision machined aluminum. Designed for use in all segments of production sound offering impressive RF range, wide bandwidth with multi-channel optimization. It provides digital Encryption, Sound Devices Superslot™ compatibility and use in 25-pin Panasonic™/Ikegami™ Camera slots, over the shoulder bag setups and multi-racks.
The intuitive easy access menu uses an Organic Light Emitting Diode (OLED) display which is extremely clear yet consumes very little power. All parameters are set by three pushbuttons on the top of the unit. The screen can be flipped 180º for best viewing angle when in a rack or if in a bag setup.
Maximum Ratio Diversity
RF "Range" performance on 1010 is comparable to some of the world's best performing analog wireless systems.
Output & Powering
The output is selectable balanced analog or AES balanced digital. Select 25-pin D-Sub or Stand-alone adaptor. It can be easily swapped back in forth with its modular bottom design. The DX1010 Accepts external 6-18V DC by either the 25-pin or a DC connector on the cable assembly.
The LED display show powers, TX battery & diversity reception. The screen can be flipped 180º for best viewing angle in a rack or a bag setup. This is done by holding the outside buttons down for two seconds.
Modular Output Adaptors
DX1010 receivers are modular. This model arrives with an included cable assembly plate with an XLR-3M output connector and Hirose 4-pin, but is also available with a cable assembly plate with an XLR-3M output connector and Switchcraft 761K for external DC power or 25-pin D-Sub bottom plate for Panasonic™ / Ikegami™ camera slots and Sound Devices Superslot™ use. The other adaptors are also sold seperately (XLR3M/Switchcraft, bottom plate) and can be quickly swapped in the field.