TXPH Belt Pack Transmitter
A small pocket UHF transmitter that's been specially designed for universal wireless use in all segments of field production sound. The TXPH offers selectable 100 mW or 50 mW RF output power and up to 40 MHz switching bandwidth. Great for use on talent with Lavalier mics and for so called "camera hops" when sending mixer outs wireless to cameras.
• up to 40 MHz Switching bandwidth in 25 kHz steps
• 512 - 572 MHz and 614 - 694 MHz operating ranges - via 4 frequency blocks
• Compatible with En2 DX, DX2 and CX2 receivers
• Selectable output power, 100 mW or 50 mW
• Menu system driven by OLED display and 3-position navigation wheel
• Powered by Single AA or 6-18V External DC (120mA @ 12V)
• 5-pin Binder locking connector for Lavaliers and input cables w/ External DC
• Selectable Low Cut Filter at 80 Hz, 120 Hz and OFF
• 32 factory pre-set frequencies
• 32 user selected frequencies can be stored
• Available without microphone or with select Voice Technologies Lavaliers
• Made in the UK
The TXPH is set up using a series of menus which are viewed in the OLED display. All-important settings are represented by icons on the HOME screen. The menu is incredibly intuitive and a snap to work with under pressure in the field. It has a programmable screen saver to save battery life. OLED displays are even readable in bright sunlight. The Menu is so straightforward you won't need any further written instructions from them to operate the TXPH.
Powering the TXPH
The TXPH is powered by a single 1.5V AA type battery that provides up to 6 hours continuous use depending on battery type. The NiMH type is recommended for optimal battery life. External 6-18V DC is supplied via the Binder 5-pin connector when using input cables.
The mic input is via a durable Binder 5-pin locking connector and provides powering for most electret lavalier microphones and also accepts Line Level input sources via their accessory cables. Binder is a top quality audio connector brand manufactured in Germany.
CX2/P 2-Channel Slot-In True Diversity Receiver
Total flexibility. Anywhere in the world
The CX2-P is a twin channel, true diversity receiver specifically designed to fit neatly into most professional Panasonic and Ikegami slot in cameras. It is equipped with two true diversity receivers which can be linked to separate transmitters and features a large 80MHz switching bandwidth making it ideal for ENG crews and documentary makers who work in different locations around the world. Up to 10 different frequency tables can be preset in the unit giving it enormous flexibility and within each table, individual frequencies can be manually selected using the OLED menu displays. It is also equipped with a digitally controlled tracking filter that automatically tracks the chosen frequency table and allows greater selectivity for the frequency table being used.
The CX2-S draws its power from the camera itself. Separate batteries are not required.
Easy set up menus
This unit is set up using a series of menus which are viewed in the OLED display. You are guided through the set up by a series of easy-to-read symbols and all parameters are selected using three buttons on the unit's front panel. It's so straightforward you won't need any further written instructions from them.
OLED menu driven displays
This unit has an organic light emitting diode (OLED) display which is extremely clear yet consumes very little power. The screen shows all the important information you need to monitor the system when in use and also displays the En2's unique easy set-up menu.
Frequency scan function
In an increasingly crowded environment, you need to be able to select usable frequencies on location quickly. So, all receivers in the En2 range have a built-in scan facility which allows you to scan for a free channel or scan for the transmitter. In addition, on this unit, selecting 'tune' mode brings up a spectrum analyzer type display which allows you to see the RF in the local environment.
VT500 Lavalier Microphones
TXPH Transmitters are available without microphone or with select Voice Technologies Lavaliers. Popular Lavaliers and Headsets like Sanken, Tram and Countryman can all be wired up with a Binder 5-pin connector by your dealer. You can also choose to have a Voice Technologies professional Lavalier included with your TXPH. Available models are VT500, VT401HS or VT403. Each VT will be supplied with an Otter Box and applicable Lavalier accessories.